Amazing small fishing boat inflatables
Foldable inflatable rowing boat is a popular full sized v keel bottom dinghy ,the floor is removable , the boat can be roll up and easy to arrange transport .
Optional floor: aluminum floor ,plywood floor , slat floor , air deck, VIB floor .
Tube material : 0.9mm PVC, 1.2mm PVC, 1.0mm ORCA hypalon, 0.9mm Achilles hypalon .
The foldable inflatable boat with removable aluminum floor is much lighter than aluminum RIB and fiberglass RIB , it means equip with less power outboard motor and less fuel . It is easy to repair. It is also can be a rowing boat with paddles equipped .
Specification : foldable inflatable sport boat RXK series model
Overall | Overall | tube | Max | Max | ||
Model | Length | Width | diameter | Chamber | Power | Capacity |
| (cm) | (cm) | (cm) | (HP) | (person) | |
RXK-200 | 200 | 136 | 37 | 2+1 | 5 | 2 |
RXK-230 | 230 | 136 | 37 | 3+1 | 5 | 2 |
RXK-250 | 250 | 136 | 37 | 3+1 | 8 | 2.5 |
RXK-270 | 270 | 152 | 42 | 3+1 | 10 | 3 |
RXK-300 | 300 | 152 | 42 | 3+1 | 12 | 3 |
RXK-330 | 330 | 152 | 42 | 3+1 | 15 | 4 |
RXK-360 | 360 | 172 | 47 | 3+1 | 20 | 4.5 |
RXK-390 | 390 | 172 | 47 | 3+1 | 30 | 6.5 |
RXK-420 | 420 | 188 | 48 | 4+1 | 40 | 7 |
RXK-470 | 470 | 188 | 48 | 4+1 | 50 | 8 |
RXK-520 | 520 | 202 | 50 | 4+1 | 75 | 9 |
RXK-570 | 570 | 202 | 50 | 4+1 | 90 | 10 |
RXK-620 | 620 | 221 | 57 | 5+1 | 115 | 11 |
RXK-670 | 670 | 221 | 57 | 5+1 | 125 | 12 |
RXK-720 | 720 | 236 | 62 | 5+1 | 135 | 14 |
RXK-770 | 770 | 236 | 62 | 6+1 | 150 | 17 |
RXK-820 | 820 | 256 | 67 | 6+1 | 180 | 19 |
Standard equipment:
● 2 pcs oars,
● 1 foot pump,
● 1 repair kits.
● 1 boat carry bag.
● 1pcs plywood seat
Optional equipment :
● Bow storage bag
● Seat storage bag
● Floor bag
● Extra plywood seat
● Transom wheel
● Bow tent
Package: carton .
Warranty: PVC fabric 3 years, hypalon fabric 5 year. Seam and accessory 1 year .
About valve on the inflatable boat
The valves are prepare-assembled you can leave them there permanently,because they do not damage the fabric,or the user of the boat,Loosen the front cap and place pump-hose to fill the boat.Inside the valves is a nipple,press and turn it and air will come out.The valve will close the same way too.
Before you place the floor,you have to inflate the air chambers (except the keel) a bit through valve.This way it is easier to place the floorboards.Make sure that you use the foot-pump that is delivered with the boat (Do not ever use a high-pressure pump).
