Amazing inflatable rescue boat
Foldable inflatable sport boat is a popular full sized light weight inflatable yacht tender ,the floor is removable , the boat can be roll up and easy to arrange transport .
Optional floor: aluminum floor ,plywood floor , slat floor , air deck, VIB floor .
Unlike hard bottomed inflatable boat , this kind of foldable inflatable boat can be deflate and store in a small space as your convenience . And do not need big trailer to move it , just put into trunk of the car.
Specification : foldable inflatable sport boat RXK series model
|
Overall |
Overall |
tube |
|
Max |
Max |
Model |
Length |
Width |
diameter |
Chamber |
Power |
Capacity |
|
(cm) |
(cm) |
(cm) |
|
(HP) |
(person) |
RXK-200 |
200 |
136 |
37 |
2+1 |
5 |
2 |
RXK-230 |
230 |
136 |
37 |
3+1 |
5 |
2 |
RXK-250 |
250 |
136 |
37 |
3+1 |
8 |
2.5 |
RXK-270 |
270 |
152 |
42 |
3+1 |
10 |
3 |
RXK-300 |
300 |
152 |
42 |
3+1 |
12 |
3 |
RXK-330 |
330 |
152 |
42 |
3+1 |
15 |
4 |
RXK-360 |
360 |
172 |
47 |
3+1 |
20 |
4.5 |
RXK-390 |
390 |
172 |
47 |
3+1 |
30 |
6.5 |
RXK-420 |
420 |
188 |
48 |
4+1 |
40 |
7 |
RXK-470 |
470 |
188 |
48 |
4+1 |
50 |
8 |
RXK-520 |
520 |
202 |
50 |
4+1 |
75 |
9 |
RXK-570 |
570 |
202 |
50 |
4+1 |
90 |
10 |
RXK-620 |
620 |
221 |
57 |
5+1 |
115 |
11 |
RXK-670 |
670 |
221 |
57 |
5+1 |
125 |
12 |
RXK-720 |
720 |
236 |
62 |
5+1 |
135 |
14 |
RXK-770 |
770 |
236 |
62 |
6+1 |
150 |
17 |
RXK-820 |
820 |
256 |
67 |
6+1 |
180 |
19 |
How to inflate the boat ?
Start to inflate the boat. We advise you to do this with the foot-pump that is delivered with the boat.
Maximum Air Pressure: a. Tube 3.6 PSI(0.25 bar);b. Keel 3.6 PSI (0.25 bar);c.Air Floor 10.2 PSI (0.70bar)
Start inflating both tubes. Then inflate the nose .After you have inflated these three compartments you can start inflating
the keel ,make sure that you inflate the keel hard.
Now close all the front caps of the valves, place the oars and your boat is ready to sail.
Tip :Do not inflate the keel until floorboards are installed .
Attention: Make sure you never exert to much pressure on the air chambers when the boat is exposed to the sun, because air
will increase with warmth which can cause over pressure.(1℃=Cause a changing of 0.004 bar pressure)When the
temperature goes down ,the pressure goes down also.
About aluminum oars
Specification :
1)oars are made from aluminum alloy , high-intensity ABS
2)Oar blades are streamed design , made of high-intensity ABS
3)Aluminum tubes with ABS cap on top .
4)The disassemble design of the oar make it is easy to to storage when disassemble to two parts , and after assemble it will become one pcs oar , strong and easy to use .
Usage : The oars are standard equipment for inflatable boat. Small inflatable boat can use oar to row if client do not equip with outboard motor .
Oars also can be used row from shallow water to deeper water , then start the outboard motor , then ride the boat smoothly on the sea or in the lake .