Amazing Achilles hypalon fiberglass inflatable boat
Small size FRP RIB is a popular full sized adventure inflatable boat with hard bottom. The tough RIB features of fiberglass v hull are anti-corrosion and rugged durable . Transom is designed for short shaft outboard motor . Most popular size are 9ft 10ft 11ft 12ft 13ft .
Tube material : 0.9mm PVC, 1.2mm PVC, 1.0mm ORCA hypalon, 0.9mm Achilles hypalon .
Fiberglass Hull: White powder coated
NOAHYACHT fiberglass inflatable boat hull construction and FRP transom with solid material design make the boat is strong enough to equip with more powerful engine , this make the boat ride fast and smoothly on the sea or in the river or on the bay .
Specification : small size FRP RIB open deck SXV model
|
|
Overall |
Overall |
tube |
|
Max |
Max |
|
Model |
Length |
Width |
diameter |
Chamber |
Power |
Capacity |
|
|
(cm) |
(cm) |
(cm) |
|
(HP) |
(person) |
|
SXV230S |
230 |
155 |
38 |
2 |
6 |
2 |
|
SXV250 |
250 |
155 |
38 |
3 |
8 |
3 |
|
SXV270 |
270 |
164 |
42 |
3 |
10 |
3 |
|
SXV300 |
300 |
164 |
42 |
3 |
12 |
4 |
|
SXV330 |
330 |
164 |
42 |
3 |
15 |
5 |
|
SXV360 |
360 |
164 |
42 |
3 |
20 |
5.5 |
|
SXV390 |
390 |
170 |
45 |
3 |
25 |
6 |
Package: foam package or plywood box as clients required .
Warranty: PVC fabric 3 years, hypalon fabric 5 year. Seam and accessory 1 year .
How to test an outboard motor on land?
Step 1: You can test an outboard motor without access to a boat or ocean. Simply mount it to a sturdy platform, place a big bucket underneath it and fill it with water so the propeller is fully submerged.
Step 2: Clean out the gas can of old gas and oil mixture because it may be water contaminated. Add fresh gas and proper amount of two -stroke oil into the can. Different brands of oils require different amounts so read the directions carefully.
Step 3: It the motor hasn't been started in a long time starting fluid will help it start. Unhook the rubber shields over the spark plugs and unscrew the spark plugs all the way out. Starting fluid/ Either is sprayed into the spark plug cavity as well as into the air filter.
Step 4: If your motor doesn't start by pilling the cord it may need to be jumped similarly to jumping a car. Use a battery of at least 12 V on one end and hook up jumper cables onto the metal screw heads near the starter of the motor.