Amazingly light weight and hard bottom inflatable boat with aluminum v hull
Aluminum rib is a popular full sized inflatable tender for big yacht. The tough RIB features of aluminum hull are environmental friendly , ultra light and rugged durable .
NOAHYACHT Aluminum rigid hull boats (RIB) are built with top level German MEHLER PVC which is a heavy duty , long life time fabric with extreme resistance against UV, cuts ,abrasions, wear and tear .
Tube material : 0.9mm PVC, 1.2mm PVC, 1.0mm ORCA hypalon, 0.9mm Achilles hypalon .
Hull: White powder coated / raw aluminum
Specification : single v hull series SXV-AS model
Overall | Overall | Inside | tube |
| Max | Max | Max | Boat | |
Model | Length | Width | Width | diameter | Chamber | Power | Capacity | Loading | Weight |
(cm) | (cm) | (cm) | (cm) |
| (HP) | (person) | (KG) | (KG) | |
SXV240AS | 240 | 152 | 70 | 38 | 3 | 6 | 2 | 280 | 36 |
SXV270AS | 270 | 152 | 70 | 38 | 3 | 10 | 3 | 450 | 42 |
SXV300AS | 300 | 166 | 77 | 42 | 3 | 12 | 4 | 540 | 49 |
SXV330AS | 330 | 166 | 77 | 42 | 3 | 15 | 5 | 600 | 52 |
Standard equipment:
● 2 pcs oars,
● 1plywood seat,
● 1 foot pump,
● 1 repair kits.
Optional equipment :
● Seat storage bag
● Bow storage bag
● Boat cover
● Extra plywood seat
● Aluminum seat
● Bimini
● Anchor roller
Warranty: PVC fabric 3 years, hypalon fabric 5 year. Accessory 1 year .
Hand glued seam Vs. Heat welded seam
There are two methods to construct inflatable boat , cold glued by hand and heat welded by machine . Usually the pvc boat can be glued by hand and also can be heat welded by machine . Hypalon boat only can be glued by hand . It is for the reason of the different features of pvc and hypalon themselves .
Both of the two methods have their different advantages , hand glued seam use glue as solvent to make four layers overlapped . It require the workers have excellent skills . It is easy to repair if have damages after many years later .
Heat welded seam is permanent, it is use the heat machine to melt the pvc fabric directly , and reduce the risk of air leaking problem of the tube . It is widely used in current inflatable boat factories . It also require skill workers to operate the heat machine reach the right temperature to make the seam straightly and strong .