Amazingly light weight and tough aluminum rib dinghy
Aluminum rigid hull inflatable boat is a popular full-sized hard bottomed open tender . The tough RIB features of aluminum hull are environmental friendly , ultra light and rugged durable .
Our aluminum rigid hull inflatable boats (RIBS) are runs stably and smoothly on the sea, even the professional sport boater will feel excited about them .
Tube material : 0.9mm PVC, 1.2mm PVC, 1.0mm ORCA hypalon, 0.9mm Achilles hypalon .
Hull: White powder coated / raw aluminum
Specification : single v hull series SXV-AS model
Overall | Overall | Inside | tube |
| Max | Max | Max | Boat | |
Model | Length | Width | Width | diameter | Chamber | Power | Capacity | Loading | Weight |
(cm) | (cm) | (cm) | (cm) |
| (HP) | (person) | (KG) | (KG) | |
SXV240AS | 240 | 152 | 70 | 38 | 3 | 6 | 2 | 280 | 36 |
SXV270AS | 270 | 152 | 70 | 38 | 3 | 10 | 3 | 450 | 42 |
SXV300AS | 300 | 166 | 77 | 42 | 3 | 12 | 4 | 540 | 49 |
SXV330AS | 330 | 166 | 77 | 42 | 3 | 15 | 5 | 600 | 52 |
Standard equipment:
● 2 pcs oars,
● 1plywood seat,
● 1 foot pump,
● 1 repair kits.
Optional equipment :
● Seat storage bag
● Bow storage bag
● Boat cover
● Extra plywood seat
●Aluminum seat
Bimini
Anchor roller
Warranty: PVC fabric 3 years, hypalon fabric 5 year, accessory 1 year .
ORCA 828 HYPALON test report
Basic fabric: Polyester high tenacity 1100 dtex -990 deniers | ||||
Coating : EXT: Chlorosulfonated Polyethylene(CSM) / Polychloroprene (CR) | ||||
Specifications | Standard-test | Direction | Result (imperial) | Result (metric) |
Surfacic mass | ISO2286-2 | 38.34( | 1300( | |
Tensile strength | ISO1421 | CH(W) TR(F) | ≧393.26lbs/in | ≧350daN/5CM |
Tear Resistance | ISO4674-1 | CH(W) | ≧44.96lbs ≧35.97lbs | ≧20daN |
Permeability(Helium) | NFG37 114 | <3 l/m2/24H | ||
Peeling test adhension | ISO 2411 | ≧16.85 lbs/in | ≧15daN/5CM | |
Low temperature resistance | NF EN 1876-2 | ≦-22°F | ≦-30°C | |
Heat aging 7 day at 158°F(70°C) | NF EN 12280-1 | Tensile strength unchanged | ||
Hydrocarbon resistance | ISO1817 | Tensile strength unchanged | ||
Fill distortion | NFG 37 119/1 | 80%≦1.18in | 80%≦3cm |
Standard width: 57 in -145cm (edge cut )
Standard colors
Assembling process: To be assembled only by gluing (CR base glue +hardener).