Amazing light weight and tough aluminum hull dinghy
Welded Aluminum v hull with front locker is a popular full sized yacht tender. The tough RIB features of aluminum hull are environmental friendly , ultra light and rugged durable . The most popular sizes are 10ft , 11ft ,12ft, 13ft .
Aluminum RIB are usual used as dinghy and tender on large yacht , it is become popular in recent years , more and more family buy it and use it for fun and enjoy family time at the weekend with this kind of inflatable boat which is easy to transport and inflate.
Tube material : 0.9mm PVC, 1.2mm PVC, 1.0mm ORCA hypalon, 0.9mm Achilles hypalon .
Hull: White powder coated / raw aluminum
Specification : aluminum rib with front locker series SXV-AN model
● 2 pcs oars,
● 1plywood seat
● 1 foot pump,
● 1 repair kits.
Optional equipment :
● Seat storage bag
● Boat cover
● Extra plywood seat
● Aluminum seat
Warranty: PVC fabric 3 years, hypalon fabric 5 year. Seam and accessory 1 year .
What is the working air pressure for inflatable boat ? Is the pressure gauge necessary to equip with ?
The working pressure for inflatable boat as below:
Tube: max 3.6psi (25kpa), recommend 2.9psi (20kpa)
Keel : max 5.8psi (40kpa), recommend 4.3psi (30kpa)
Floor: max 10psi (70kpa), recommend 8.7psi (60kpa).
Pressure gauge is an option equipment for inflatable boat , you can use pressure gauge to test the air pressure and keep it in the best working condition. But it is not necessary, as usually there will be one piece high pressure relief valve on the chamber of bow or one piece on each chamber to avoid over inflate problem. If over inflate , the safety valve will begin to work to keep the boat safe . When you inflate the tube , until feel the tube is hard to touch and become difficult to pump more air in , this means the tube is rigid enough and OK to use .
If the boat expose directly under sunlight, it might explode . So please do not over inflate and better install a safety valve .